快乐时时彩

中文版 | ENGLISH
Free hotline: 400 0311 557
Products
Multifunctional pipe cutting machine
Automatic cut pipe bender HY40
Automatic cut pipe bender HY40 longer can be cut within 600
Automatic cut pipe bender HY60
Automatic cut pipe bender HY60 longer can be cut within 600
Automatic cut pipe bender HY90 longer can be cut within 450
Automatic cut pipe bender HY90
HY Automatic car
Full automatic pipe cutting machine for disposable feeding 350MM
CONTACT US
Add:yuyao city,zhejiang,china
HotLine:0574-62197377
Sales hotline :13705845557
13958385558
Fax:0574-62197378
Web:www.jzlmhzs.com
在线留言
Online message
The current position:Home > Products > Automatic cut pipe bender HY90
Automatic cut pipe bender HY90
Products video
Use and features
Parameters
Characteristics
Fault and eliminate
HY90 CNC cutting machine is the bearing steel tube cutting into a circle and all kinds of steel tube bearing auto &motorcycle parts of machine tools ,automatic feeding automatic cutting, all kinds of data can be conveniently set up adjustment, automation and humanized degree high, specially for the mass production of bearing.
One)  Pipe cutting outer diameter……………………………………………………Φ50~Φ90
Two)  Working beat(Φ50 outside as an example)…………………30 per minute
Three)  Product cutting error………………………………………Less than 0.05 mm
Four)  Spindle transport……………………………………800 round
Five)  Feed rate:
        Horizontal fast forward, retreat quickly……………………12 M/min (no class)
        Horizontal feed……………………………0~2 M/min (no class)
Six) Main motor:
        Model………………………………Y112-4
        Power………………………………4kw
        Speed………………………………1420rad/min
Seven)Ac servo
        Model………………………………ECMA-C20604PS
        Ac servo…………………………Delta
Eight) Pneumatic system:
         1.、Input source pressure………………………5.5~6kg/cm²
         2、Input Gas source flow……………………350 Litres/points
Nine) Machine size:Long 1350*Wide*1600*High 1480
Ten) Machine net weight:950kg
One) Lathe adopts PLC computer control, very convenient change process parameters, so it has good stability, high reliability, processing precision, efficiency higher characteristic, prior electricity, gas system fully automatic.
Two) Lathe tool by electric control servo motion, feeding speed stability, feed quantity accurate, but also has slowly into the characteristics of the retreat quickly, so that ensure the feed the speed when the control and can save you a lot of time recede cutter, and at the same time according to need to adjust the parameters of a knife, convenient and practical, adapt to the operation.
Three) Lathe up-down material are not manual operation, spindle implementation does not stop feeding, guarantee every time the speed of the cutting consistent, to ensure the accuracy and ensure the cutting tool.
Four) The blow gas way lathe cooling, and only in the feed blowing, such already cooling the cutter and save the power consumption.
  Fault phenomena Reason Elimination method
1 Regulation doesn’t work Limit sensor has in place
Or silk pole trip has in position
Leave sensor seat
Screw trip may Forward walk backwards
2 Cycle can’t start Didn’t drive shaft rotation, Servo no reset before and after,
Anticipate count has in place
Open spindle, turn off the total power
reset,feeding
3 Broken tool Insufficient Gas source,cutter has not grind well,
Front clip is too loose
checking Gas source,Namely electronic valves, replacement
better cutter, locking front clip
4 Precision dimension deviation Fixed screw nut is loose, Screw after the solid Nuts loosening,Cylinder after the external
locking Nuts loosening,The feeding chuck or feeding
After the loosening of the steel sleeve cylinder
tail shaft loose
Fixed screw nut
Fixed chuck steel set of lock
Lock bearing nuts or
Change bearing
5 Feeding is not in place Cylinder electronic valve before and after the string of steam,
Former chuck tight , Display size is not no place
Adjustment of electronic valves combined with white oil or replace former chuck,Check the display feed size
6 Run material before and after Chuck partial before and after,Clamping the intensity of the uneven Clamping uneven efforts Replacement of front and rear chuck,
Or repair to Chuck the same as steel pipe sizes
7 Alarm Not according to the regulations,Broken tool
Before and after the chuck tight or electronic valve string gas
Turn off the power,reset,Check the chuck
Electronic valve replacement
Copyright (c) 2012 Century All Rights Reserved ICP:1100000 YUYAO HONGYU MACHINERY FACTOY   DESGIN:GOODUO
友情链接:9号彩票  9号彩票  9号彩票  9号彩票  9号彩票  9号彩票  9号彩票  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!